David W Law

US Patent:

7780126, Aug 24, 2010

Filed:

Apr 5, 2007

Appl. No.:

11/696740

Inventors:

David Law - Seattle WA, US
Ryan Mongan - Sammamish WA, US
Andrew Grant - Callander, GB
Graeme Esarey - Seattle WA, US
Martin Aaron Leugers - San Francisco CA, US
Josh Druker - San Francisco CA, US
Hao Yu Feng - Mountain View CA, US
Tark Abed - Palo Alto CA, US

Assignee:

Daymen Photo Marketing LP - Markham CA

International Classification:

F16M 11/38

US Classification:

248168, 396428

Abstract:

As one of the examples, one of the main features is that the setup is small enough that it can live with the camera full-time, and carried around by the user. The legs fold into a very compact size that fit within the footprint of the camera, used for any type camera, e. g. compact point-and-shoot camera, camera phone, or SLR camera. The tripod can then live unnoticed on the bottom of the camera, until a shot requiring a tripod is needed. Then, the legs can be deployed to act as a firm stand. Another one of the main features of this tripod is that all the legs do not share a common end-point or pivot-point. This allows the legs to form a very wide stable platform, even when they are short. In general, for N legs, some legs may have common end-points or pivot-points, but not for all N legs. (N is a positive integer, greater or equal to 3. ) This invention can be applied to any camera (e. g.

US Patent:

8195601, Jun 5, 2012

Filed:

Sep 26, 2008

Appl. No.:

12/238451

Inventors:

David W. Law - Seattle WA, US
Jeffrey Craig Kunins - Seattle WA, US
Eric Zappa - Seattle WA, US
Brian M. Perrin - Redmond WA, US
Archana M. Gadkari - Bellevue WA, US
Dan Wu - Lynnwood WA, US
Joseph Andrew Bono - Kirkland WA, US
Jeffrey Earl Steinbok - Redmond WA, US

Assignee:

Microsoft Corporation - Redmond WA

International Classification:

G06F 17/30

US Classification:

707600

Abstract:

A visitor to a profile page is invited to modify a user profile associated with the profile page. If the visitor elects to provide a suggested modification to the profile page, a message is transmitted to the user that owns the profile page requesting authorization to perform the suggested modification. In response to the message, the user can accept the suggested modification to the user profile, decline the suggested modification to the user profile, or edit the suggested modification to the user profile. If the user accepts or edits the suggested modification to the user profile, the user profile is modified accordingly. In this manner, a visitor to a profile page can assist in the creation of a user profile.

US Patent:

8230992, Jul 31, 2012

Filed:

Dec 20, 2010

Appl. No.:

12/973007

Inventors:

David John Law - Seattle WA, US
Ryan Hill Mongan - Orange CA, US

Assignee:

Speculative Product Design, LLC - Palo Alto CA

International Classification:

B65D 85/00
F16M 11/00

US Classification:

206320, 2481761, 248458, 248918

Abstract:

A case or cover for an electronic device such as a tablet computer is disclosed. This case allows the user to protect and personalize their tablet computer. The case allows the user to position the device for viewing in either portrait or landscape mode and does not require the user to hold the device in the desired orientation. The case may have a distinct hinge, with a stop that limits its rotational travel allowing the user to prop the electronic device up, at a desired viewing angle.

US Patent:

8302749, Nov 6, 2012

Filed:

Sep 22, 2008

Appl. No.:

12/235481

Inventors:

Bradley S. Melmon - Seattle WA, US
Ryan H. Mongan - Sammamish WA, US
David J. Law - Seattle WA, US
Parker T. Chou - Seattle WA, US
Graeme Esarey - Seattle WA, US

Assignee:

Daymen Canada Acquisition ULC - Vancouver, British Columbia

International Classification:

A45C 3/08

US Classification:

190110, 190100, 190109, 190102, 190107, 150103, 150104, 150105, 150106, 150107, 2063162, 2063154, 224153, 224583, 224585

Abstract:

The invention relates generally to bags and cases for storage of cameras or other objects. More specifically, the system integrates a waterproof dry bag component optimized for storage of cameras and camera accessories, with a bag component of substantially the same size and shape of the dry bag into a single unit. When separated, the two components can perform as individual units.

US Patent:

20080245452, Oct 9, 2008

Filed:

Jun 30, 2007

Appl. No.:

11/772210

Inventors:

David Law - Seattle WA, US
Graeme Esarey - Seattle WA, US
Ryan Morgan - Sammamish WA, US

International Classification:

B65D 85/38

US Classification:

150154, 2063162

Abstract:

This application relates to the improvement to the current state-of-the-art for weatherproofing a camera or video recorder (or a cell phone having those functionalities). That allows an avid photographer to take their camera out into the rain and use all the controls through the skin, without the camera getting wet. (It is not submersion-proof, but for all practical purposes, it is waterproof) It features plug-in covers for gaps, plus any or all of the below: Double layer (with ultra thin layer on inside and/or also outside), Zip Lock features around the holes, Hot shoe drape over top of camera, or Finger Condom. Many other variations and extensions are also discussed in the specification and figures.

US Patent:

20080245453, Oct 9, 2008

Filed:

Jun 30, 2007

Appl. No.:

11/772217

Inventors:

David Law - Seattle WA, US
Johannes Refskund Busck - Soeborg, DK
Graeme Esarey - Seattle WA, US

International Classification:

B65D 85/38

US Classification:

150154

Abstract:

In one example, we have a rubber skin that fits a range of battery grips. It has a number of cut-outs that allow the material to stretch and accommodate different cameras (or sizes/models), and also, access the different camera control locations, knobs, or buttons. This can apply to video recorders or any electronic devices, in general. This provides protection for device, for impact, scratch, or water, for example. In addition, it provides easy access or change of battery. Thus, convenience, adjustability, and protection are provided at the same time. Many other variations and extensions are also discussed in the specification and figures. In addition, the skin can be solid/rigid or soft. Furthermore, using a band or Velcro, with multiple pieces or attached pieces, one can easily adjust the sizes for different cameras or models.

US Patent:

20080247746, Oct 9, 2008

Filed:

Jun 30, 2007

Appl. No.:

11/772222

Inventors:

David Law - Seattle WA, US
Graeme Esarey - Seattle WA, US

International Classification:

G03B 17/56

US Classification:

396419, 24834601, 2483462

Abstract:

Most cameras have a tripod mounting hole in the bottom with a standard screw thread. All current tripods mount use a threaded fastener that screws into this hole and tightens the camera to a tripod or other auxiliary devices. Often, the tripod will mount a small intermediary part that can remain with the camera, but which allows the camera to be quickly removed from the tripod. This disclosure obviates the need for the intermediary part. Here are some of the main features and embodiments: “Expanding Rubber Bung”: A flexible elastomeric part or other material, that when tightened, expands in girth. “Pivoting metal Christmas tree”: Similar to the above concept, except that a hard material pivots out, to clamp the sides of the hole, once it has been easily inserted in its collapsed state. The following are some of the applications and examples of the current disclosure: cameras, video recorders, civil engineering equipment for leveling measurement or surveying, laser equipment for tracking, leveling calibration, or marking, optical equipment, astronomical equipment, telescopes, binoculars, lab equipment, or calibration equipment are some examples of tripod usage or similar setups, e.g. setups with more legs, different shapes, stands, supports, or foldable/mobile setups. Many other variations and extensions are also discussed in the specification and figures.

US Patent:

20080247749, Oct 9, 2008

Filed:

Apr 3, 2007

Appl. No.:

11/695624

Inventors:

David Law - Seattle WA, US
Ryan Mongan - Sammamish WA, US
Xio Lei - Shanghai, CN

International Classification:

G03B 17/02
B65D 85/38

US Classification:

396535, 2063161, 361681

Abstract:

Currently, there are many compact cameras from multiple vendors. These come in all shapes and sizes. The majority of the cases (e.g. for protection, security, and safety) on the market are generic loose-fitting cut-and-sew products. The camera is stowed in the case and then brought out to take a picture. The person then has to find a place to put the case while they take the picture and often the case becomes misplaced or damaged (e.g. by water or dirt). The solution that we are showing is a wrapping cover which is permanently attached to the camera (as one example), to protect the camera, for example. The cover wraps around the camera and forms a very close fitting protective cover for the camera. Because the user wraps the material around the camera, the size of the cover is as small as possible (for better stowing in pockets and purses (for better mobility and more convenience)). There are no extra air spaces because of a generically sized cover (in this example). The wrap cover is attached full-time to the bottom of the camera, using the standard tripod mounting hole that exists on the majority of cameras. When there is no mounting hole, there is a hook, ring, or similar attachment device that can perform the same function. When the person wants to take a picture, he/she simply unwraps the wrap cover, which then hangs below the camera, and then he/she takes the photograph. Other variations are also discussed.