Kenneth Emil Swanson

US Patent:

7090773, Aug 15, 2006

Filed:

Dec 15, 2003

Appl. No.:

10/734977

Inventors:

Leroy Meddock - Oceanside CA, US
Mark Meddock - Oceanside CA, US
Kenneth Swanson - Oceanside CA, US

Assignee:

SPX Corporation - Charlotte NC

International Classification:

B01D 35/14

US Classification:

210342, 2104165, 210DIG 13

Abstract:

An improved combination full flow bypass oil filter is presented where the output of the bypass filter is obtained by non-venturi means and the extremely clean bypass filter output is measurable at all engine oil pressures. The bypass filter output is not blended with the full pass filtered oil until the bypass filtered oil is returned to the engine sump. Measurements have been made of this system that show positive bypass filter output in the range of 5 to 85 PSI engine oil pressure, the output a linear function of the oil pressure coming from the engine.

US Patent:

56792514, Oct 21, 1997

Filed:

Jul 24, 1995

Appl. No.:

8/505851

Inventors:

Kenneth E. Swanson - Rancho Santa Fe CA
Charles W. Johnson - Amarillo TX

Assignee:

The OilGuard Company, LLC - Vista CA

International Classification:

B01D 2706

US Classification:

210437

Abstract:

A diesel engine secondary oil filter is formed from a punched tinned steel spiral lock seam center tube, with a flanged cap at one end and a flanged threaded outlet at the other end. A layer of polyester non-woven media is wrapped in one wind around the center tube. A yarn is wound is a 27-diamond pattern in a first yarn section out to two inches outer diameter. The yarn is tied off. Knitted socks are first placed partially on axial ends of the first wound section, leaving half of the socks extending over the ends. A sheet of activated carbon paper about 1/6 of an inch thick and about 52 inches long is rolled onto the filter cartridge with about nine turns. The carbon paper is made of a cellulose paper impregnated with about 50% activated carbon powder by weight. After the activated carbon paper is wrapped around the first wound section, the free ends of the socks are pulled over axial ends of the activated carbon paper layers, and an outer yarn is wound around the activated carbon paper out to a four inch outer diameter. The yarn is a cotton fiber paper fiber blend, in which the paper fibers are created from crushed and torn two inch strips of thin loose fiber paper such as, for example, paper like toilet paper.