Michael Simons

age ~34

from Salt Lake City, UT

Get Report

Also known as:

Mike Simons

Connected to:

Michael Simons Phones & Addresses

Salt Lake City, UT
W Valley City, UT

Work

Company:

U.s. army jblm
Apr 2007
Position:

Technical inspector

Education

School / High School:

Shelle Aviation Online- Salt Lake City, UT
2013
Specialities:

*A & P certificate, and Southern Oregon DME, on line and Medford, OR 2013 in Aviation Maintenance Airframe and Powerplant License

Skills

Conduct routine and special inspections ... • including landing gear • hydraulic systems • and Flight controls to locate cracks • breaks • leaks • or other problems. Inspect completed... • service bulletins • and other specifications to determine th... • documenting all preventive and correctiv... • space vehicles • systems • or components • following drawings • schematics • charts • engineering orders • and technical publications. Inspect ... • using precision instruments. Obtain ... • repair • and rebuild aircraft structures • functional components • and parts such as wings and fuselage • rigging • hydraulic units • oxygen systems • fuel systems • electrical systems • gaskets • and seals. Set up and operate ground... • components • and assemblies • using circuit testers • oscilloscopes • or voltmeters. Keep records of maint... • technicians • and other aircraft maintenance personnel... • assemblies • and systems in aircraft • using hand tools • power tools • or soldering irons. Adjust • repair • or replace malfunctioning components or ... • using hand tools or soldering irons. ... • instruments • magnetos • inverters • and in-flight refueling systems • using hand tools and soldering irons. ... • electrical controls • and junction boxes • using hand tools or soldering irons. ... • modification • or repair and overhaul of aircraft and a... • tires • and exteriors of fuselage • wings • and engines for evidence of damage or co... • repaired • or modified aircraft to identify damage ... • using checklists • hand tools • and test instruments. Prepare and ma... • inspection • investigation • and certification records and reports. ... • instruments • and systems under a variety of conditions • using both manual and automatic controls... • meters • and other instruments to detect evidence... • components • and assemblies • using circuit testers • and voltmeters. Keep records of main... • technicians • and other aircraft maintenance personnel... • assemblies • and systems in aircraft • using hand tools • power tools • or soldering irons. Adjust • repair • or replace malfunctioning components or ... • using hand tools or soldering irons. ... • instruments • magnetos • inverters • and in-flight refueling systems • using hand tools and soldering irons. ... • electrical controls • and junction boxes • using hand tools or soldering irons. ... • policies • and procedures for health • safety • and environmental compliance. Insp... • using tools such as calipers • micrometers • height gauges • protractors • or ring gauges. Set up and verify th... • devices • or products. Test products or subass...

Resumes

Tax Associate

view source

Location:

Salt Lake City, UT

Industry:

Accounting

Work:

Cliftonlarsonallen
Tax Associate
Pinnacle Accountancy Group Pllc Jan 2017 - Oct 2017
Tax Intern
Utah Retirement Consulting Jul 2014 - Jan 2017
President
Liberty Tax Service Jan 2012 - Jun 2014
Manager

Education:

Weber State University 2014 - 2016
Bachelors, Accounting Utah State University 2009 - 2014

Skills:

Microsoft Office
Customer Service
Microsoft Excel
Management
Microsoft Word
Powerpoint
Public Speaking
Research
Project Management
Leadership

Interests:

Education
Economic Empowerment

Languages:

English

Certifications:

Life Insurance License

Michael Simons University Place, WA

view source

Work:

U.S. Army JBLM

Apr 2007 to 2000
Technical Inspector U.S. Army JBLM

Apr 2005 to Apr 2007
Flight Engineer U.S. Army
Fort Campbell, KY
Jun 2002 to Mar 2005
Flight Engineer U.S. Army Teague

Sep 2000 to Jun 2002
Flight Engineer E Co 160th SOAR (A)

Education:

Shelle Aviation Online
Salt Lake City, UT
2013 to 2013
*A & P certificate, and Southern Oregon DME, on line and Medford, OR 2013 in Aviation Maintenance Airframe and Powerplant License SLC) Helicopter Supervisor, Senior Leaders Course 1SG Course, USAACE NCOA, Ft. Rucker, AL 2012
Fort Rucker, AL
2012 to 2012
Lean Aviation Maintenance Practices and Production control combined with Human resouces USATC NCO Academy
Fort Eustis, VA
2005 to 2005
Leadership and Aviation Maintenance

Skills:

Conduct routine and special inspections as required by regulations. Examine and inspect aircraft components, including landing gear, hydraulic systems, and Flight controls to locate cracks, breaks, leaks, or other problems. Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation. Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. Maintain repair logs, documenting all preventive and corrective aircraft maintenance. Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications. Inspect airframes for wear or other defects. Measure parts for wear, using precision instruments. Obtain fuel and oil samples and check them for contamination. Maintain, repair, and rebuild aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, and seals. Set up and operate ground support and test equipment to perform functional flight tests of electrical and electronic systems. Test and troubleshoot instruments, components, and assemblies, using circuit testers, oscilloscopes, or voltmeters. Keep records of maintenance and repair work. Coordinate work with that of engineers, technicians, and other aircraft maintenance personnel. Interpret flight test data to diagnose malfunctions and systemic performance problems. Install electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, or soldering irons. Adjust, repair, or replace malfunctioning components or assemblies, using hand tools or soldering irons. Connect components to assemblies such as radio systems, instruments, magnetos, inverters, and in-flight refueling systems, using hand tools and soldering irons. Assemble components such as switches, electrical controls, and junction boxes, using hand tools or soldering irons. Fabricate parts and test aids as required. Inspect work of aircraft mechanics performing maintenance, modification, or repair and overhaul of aircraft and aircraft mechanical systems to ensure adherence to standards and procedures. Examine aircraft access plates and doors for security. Examine landing gear, tires, and exteriors of fuselage, wings, and engines for evidence of damage or corrosion and the need for repairs. Examine maintenance records and flight logs to determine if service and maintenance checks and overhauls were performed at prescribed intervals. Inspect new, repaired, or modified aircraft to identify damage or defects and to assess airworthiness and conformance to standards, using checklists, hand tools, and test instruments. Prepare and maintain detailed repair, inspection, investigation, and certification records and reports. Approve or deny issuance of certificates of airworthiness. Conduct flight test programs to test equipment, instruments, and systems under a variety of conditions, using both manual and automatic controls. Investigate air accidents and complaints to determine causes. Start aircraft and observe gauges, meters, and other instruments to detect evidence of malfunctions. Set up and operate ground support and test equipment to perform functional flight tests of electrical and electronic systems. Test and troubleshoot instruments, components, and assemblies, using circuit testers, and voltmeters. Keep records of maintenance and repair work. Coordinate work with that of engineers, technicians, and other aircraft maintenance personnel. Interpret flight test data to diagnose malfunctions and systemic performance problems. Install electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, or soldering irons. Adjust, repair, or replace malfunctioning components or assemblies, using hand tools or soldering irons. Connect components to assemblies such as radio systems, instruments, magnetos, inverters, and in-flight refueling systems, using hand tools and soldering irons. Assemble components such as switches, electrical controls, and junction boxes, using hand tools or soldering irons. Fabricate parts and test aids as required. Adhere to all applicable regulations, policies, and procedures for health, safety, and environmental compliance. Inspect finished products for quality and adherence to customer specifications. Set up and operate equipment in accordance with current good manufacturing practices and standard operating procedures. Calibrate or adjust equipment to ensure quality production, using tools such as calipers, micrometers, height gauges, protractors, or ring gauges. Set up and verify the functionality of safety equipment. Monitor and adjust production processes or equipment for quality and productivity. Troubleshoot problems with equipment, devices, or products. Test products or subassemblies for functionality or quality. Plan and lay out work to meet production and schedule requirements. Start up and shut down processing equipment.