DWG, Inc since Oct 2009
Mechanical Engineer
DeVita & Associates Jul 2004 - 2009
Mechanical Engineer
Education:
Clemson University 2002 - 2004
BSME, Mechanical Engineering
Lander University 2000 - 2002
State University of New York College at Brockport 1986 - 1990
Skills:
Cad Mechanical Engineering Hvac Autocad Engineering Revit Construction Project Engineering Leed Private Pilot Leed Ap Construction Management Piping Mep Bim Green Building Energy Efficiency Sustainable Design Process Scheduler Children's Book Author Building Design Plumbing Design Natural Gas System Design Plumbing Solidworks Manufacturing Engineering Management Private Piloting
An aircraft fuel contaminant tester has an upper transparent chamber for viewing a first sample of aviation fuel, a lower chamber, a fuel cell drain valve actuating device for loading the upper transparent chamber. A thumb actuated valve halts flow of fuel from the upper chamber into the lower chamber until actuated by the pilot after viewing contaminated fuel in the upper transparent chamber. The larger lower chamber permits several samples of fuel to be repeatedly drained from the fuel tank and examined merely by manually actuating the valve without the undesired discarding of any fuel. When the fuel in the last batch of sampled fuel, viewed in the upper chamber, is free of contaminants, the inspection process ends and the tester is inverted, draining the sampled fuel from both chambers, usually at one time only, to eliminate the repeated discarding of the fuel from the commonly used sampler cup.
A shoe includes one or more nozzles mounted to the shoe, each of the one or more nozzles including one or more inlets to take in fluid traveling in an intake direction during a kicking motion of a wearer, a bend to change a flow direction of the fluid from the intake direction to an output direction, and one or more outlets to expel fluid in the output direction.
A temperature controlled air diffuser with a temperature-sensitive element alters the direction of the supply airstream passing through it and into a conditioned airspace, based on the temperature of the supply airstream.
A nozzle shoe includes water nozzles attached to the shoe. As water enters each nozzle, it is directed through the use of turning vanes to the outlet of the nozzle. The internal turning vanes will aid in keeping the water in a substantially laminar condition for a more efficient performance while within the nozzle. The area of the outlet nozzle is smaller than the area of the inlet nozzle. This will provide a proportionally higher force out the inlet which will assist in propelling the wearer through the water at a higher velocity.
Paul Hohmann 1969 graduate of Northern Valley Regional High School in Old tappan, NJ is on Classmates.com. See pictures, plan your class reunion and get caught up with Paul and ...